Specifications

Applicable fibers: Large diameter fiber, SM, MM, NZDS, DS
Fiber count: Single
Cladding diameter: 125 µm to 500 µm
Coating diameter: 150 µm to 1000 µm
Fiber cleaved length:

8 mm to 10 mm (standard)
3 mm to 5 mm (short cleaved length)

Actual average splice loss (Measured at wavelength of 1550 nm):

0.03 dB with SM
0.02 dB with MM
0.05 dB with DS (with bare fiber clamping)

Splice time:

35sec. with 400 µm LDF
20sec. with SM
20sec. with MM
40sec. with DS

Return loss: > 60 dB
Splicing modes: 40 user programmeble modes and 120 database area (factory predetermined setting)
Splice loss estimate: Available
Attenuation splice function: 0.1 dB to 25 dB
Storage of splice result The last 1200 splices to be stored in the internal memory
Fiber display: X/Y, or X and Y simultaneously
Magnification: 135x for single X or Y view, or 67x for X and Y view
Viewing method: Two CCD cameras and 5 inch TFT color LCD monitor
Operating condition:

0 to 3500 m above sea level
0 to 95%RH
0 to 40°C

Mechanical proof test: 2.45 N
Tube heater: Built-in tube heater with 10 heating modes and 20 database area
Tube heat time:

Typical 100sec with FP-03 protection sleeve
Typical 70sec with series of micro sleeves

Applicable protection Sleeve: 60 mm, 40 mm, and a series of micro sleeves
Power supply: Auto voltage selection from 100 to 240 V AC. with two ADC-10s
Option included: U-Stage-NFF Fujikura universal stage modification for the FSM-45F-LDF fusion splicer, Allows 0° angle, increase 400 µm fiber splicing performance